CELL-DYN 3200, Abbott
1. RS 232C Connection
|
Cell Dyn 3200 |
Yeungnam Interfacer | |
|
9 pin |
9 Pin |
25 Pin |
|
2 |
3 |
2 |
|
3 |
2 |
3 |
|
5 |
5 |
7 |
2. CELL DYN 3200 Configuration
Main-Setup-Operation Setup-Computer Setup
1. Auto-transmission of ALTERTED parameter data : ON or OFF
2. Auto-transmission of NON-ALTERTED parameter data : ON or OFF
3. Auto-transmission of ALTERTED graph data : OFF
4. Auto-transmission of NON-ALTERTED graph data : OFF
5. Transmission CTS enabled : OFF
6. Set Interface parameters.
- Parameters recommanded
- Baud Rate ---- 9600
- Data Bits ---- 8
- Parity ---- None
- Stop bits ---- 1
- time out ---- 1
3. Yeungnam Interfacer Configuration
- Download Protocol(CD3200.zip) and extract zip file.
- Execute Yeungnam Config.
- Configure/Protocol Format/Import.... import YnCellDyn32.ynu
- Configure/Make or Edit protocol ---- modify protocol for your lab and save it.
- Other Configure Setting.
- Execute Yeungnam
** IF Including raw data in YnCellDyn32.zip is not compatible to your lab, you can receive raw data from your instruments using "Yeungnam Acquisition", and modify raw data with same procedures.
4. Protocol Download